1.) What will GUTTERMONSTER look like on my home?

GUTTERMONSTER's unobtrusive design and stylish colors make it look more like decorative roof trim than a gutter protection system. The Top Cap installs neatly under the second row of shingles, and the bracket and overlap slots in each cap section ensure that GUTTERMONSTER is positioned in exactly the same place along the full length of the roof line for an attractive finish.

2.) Can GUTTERMONSTER handle heavy downpours and snows?

GUTTERMONSTER attaches to the fascia board rather than the roof, so the entire gutter is extremely well supported and will not detach or sag under heavy snow loads. And, the bracket works with the heavy-gauge aluminum Top Cap to handle 5" of rain per hour without over flow (as a point of reference, hurricane-strength storms average about 6" of rainfall per hour).

3.) Will GUTTERMONSTER damage my roof?

Unlike other reverse-curve products, GUTTERMONSTER does not need to be screwed into the roof - the Top Cap is locked into position by the bracket, which is attached to the fascia board.

4.) How is GUTTERMONSTER installed? How long does it take?

First, your certified GUTTERMONSTER installer will thoroughly clean and flush out your gutters. Then, he will make sure your gutters are properly secured and pitched before beginning the installation. Next, the support brackets are installed every 2' and are screwed into the fascia board with a stainless steel Hex Head screw. The Top Cap is installed underneath the second row of shingles, and patent-pending inside and outside corners are installed where needed. Custom designed End Caps finish off the ends, and the area is cleaned and all debris is hauled away. Installation rarely takes more than one day.

5.) Is GUTTERMONSTER guaranteed to work?

Yes, GUTTERMONSTER comes with a lifetime warranty, guaranteeing its performance as long as you own your home.

6.) Will GUTTERMONSTER fit my gutters and work with my roof pitch?

GUTTERMONSTER includes an extender bracket that fits onto the primary bracket, so GUTTERMONSTER can fit gutters as large as 7 inches, and will work with even the the steepest roof pitches.

7.) Can sand/shingle grit/pine needles get into GUTTERMONSTER?

Occasionally, small debris can get into GUTTERMONSTER, but because GUTTERMONSTER so effectively keeps out large debris, it washes harmlessly through the system.

8.) Will GUTTERMONSTER ever come loose or pull away from my gutters in strong wind conditions?

The bracket secures the Top Cap firmly in place all along the roof line, ensuring the Top Cap will not budge under strong winds.

9.) Does GUTTERMONSTER require maintenance?

No - GUTTERMONSTER does need an initial 30-day weathering period to fully activate the surface of its Top Cap - but after that, it is a maintenance-free product.

10.) Can GUTTERMONSTER collect roof valley runoff?

GUTTERMONSTER patent-pending Inside and Outside Corners eliminate gaps to prevent debris from infiltrating the system, and help distribute water along the adjoining Top Caps.